Deep Down Dirt on Carpets - Solution 1

Deep Down Dirt on Carpets – Solution 1

Vanish Preen Powerpowder

Vanish Preen Powerpowder

Amazing Deep Carpet Cleaning

Vanish Preen Powerpowder

1.

Ventilate the room well prior to use.

2.

Vacuum the carpet before use.

3.

Shake the Vanish container vigorously before each use to maximise product coverage. Remove cap & treat an area of 0.6 x 1.5m squared at a time, sprinkle evenly on the carpet following the guidelines on the bottle. Do not add water.

4.

Using a soft bristle brush, immediately brush the powder thoroughly into the carpet. Continue to the next section. Wait at least 20 minutes for the powder to dry. Meanwhile replace cap tightly & fit a new vacuum bag or empty the machine. Now vacuum the whole carpet thoroughly. Occasionally you may find light patches after cleaning. The powder can bind to stain residues; you can remove the residues with a soft brush and vacuum again.

Did this solve your stain?

Other solutions to solve your stain

Didn't find the solution you were looking for?

Expert Tips

Deep down soil, grease and grit can reduce the life of your carpet. When you walk on your carpet the deep down dirt and grit wears away at the fibres like sandpaper. Grains of dirt trapped deep in the fibres rub against the carpet and can lead to premature traffic lanes which make you carpet look worn and shabby. Having your carpets 'dry cleaned' generally concentrates on the top portion of the fibres, deeper down dirt and grit tends to remain behind. Vanish cleans the entire carpet, from the base of the fibres to the top.